TM 5-3895-371-24&P
Valve plug (12) protrudes slightly through the valve
body (3). When installing valves, care must be taken
to make certain that the valve plug is seated in the
hole in spray bar.
(6)
Install gasket (1) and mount valve on spray bar. Secure with two lockwashers and
nuts (8).
MAINTENANCE OF LOW PRESSURE BURNER ASSEMBLY
Section XXXV.
2-39. Low Pressure Burner.
a.
Removel. (Refer to fig. 2-62.)
Remove screw (4) and fuel line (2).
(1)
LEGEND:
1. BURNER ASSEMBLY
4. SCREW
2. FUEL LINE
5. TUBE
3. TUBE
6. CAPSCREW AND WASHER (2)
TA 075870
Figure 2-62.
Remove/Install Low Pressure Burner Assembly.
2-120
