TM 5-3895-371-24 & P
Table 2-2. Troubleshooting (Continued).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
12. ALL NOZZLES DO NOT CUT OFF:
Step 1.
Linkage out of adjustment or worn.
Repair or replace linkage so that all spray bar levers are in appropriate position
13. SPRAY BAR DOES NOT SHIFT PROPERLY:
Loose connections.
Step 1.
Tighten connections.
Defective solenoid.
Step 2.
Replace solenoid (para 2-20).
Defective wiring.
Step 3.
Check connections and tighten as needed.
Shift lock engaged.
Step 4.
Disengage shift lock.
Linkage damaged.
Step 5.
Repair linkage (para 2-38).
14. SPRAY BAR DOES NOT RAISE & TURN UP PROPERLY:
Step 1.
Loose connections.
Tighten.
Defective solenoid.
Step 2.
Replace solenoid (para 2-20).
Defective wiring.
step 3.
Check connections.
2-11
