TM 5-3895-373-20
14.8.
REPLACE/REPAIR BLOWER MOTOR - Continued.
A.
REMOVE - Continued.
3.
REMOVE EXTENSION SCREED
BLOWER ASSEMBLIES AND FLEXIBLE
PIPE.
a.
Disconnect blower electrical connector
(15) from screed harness electrical
connector (16).
b.
Remove hex nuts (17) and clamp (18).
Discard exhaust clamp.
c.
Remove hex nuts (19), lockwashers (20),
flat washers (21), and hex head cap
screws (22). Discard lockwashers.
d.
Remove motor mounting clamp (23) and
cushions (24).
e.
Lift blower assembly (25) away from
extension screed, disconnecting flexible
pipe (26) from adapter (27).
GO TO NEXT PAGE
14-62