TM 5-3895-373-20
B.
DISASSEMBLE - Continued.
NOTE
The blower motor cannot be repaired
except for replacement of the motor
brush and spring assembly.
e.
To replace the motor brush and spring
assembly, remove brush cap (46) and pull
brush and spring assembly (47) from
motor (39). Install the new brush and
spring assembly. Install and tighten the
brush cap.
3.
REMOVE AIR CONTROL PLATE FROM
BODY.
a.
Remove thumbscrew (48) and flat washer
(49).
b.
Remove hex head cap screw (50) and
lockwasher (51). Remove air control plate
(52) from body (38). Discard lockwasher.
GO TO NEXT PAGE
14-65