REPLACE/REPAIR BLOWER MOTOR - Continued.
DISASSEMBLE - Continued.
REMOVE BLOWER MOTOR AND FAN
ROTOR FROM BODY.
Remove hex head cap screws (36) and
lockwashers (37) from body (38). Discard
Pull motor (39), motor mounting plate (40),
and fan rotor (41), assembled, from body
Loosen set screws (42) and remove fan
rotor (41) from assembled motor (39) and
motor mounting plate (40).
When removing the hex nuts that
secure motor mounting plate to the
motor, ensure that motor does not
separate. The machine screws and
hex nuts are also used to keep the
Remove hex nuts (43) and lockwashers
(44) from machine screws (45), and
remove motor mounting plate (40).
Reinstall the hex nuts onto the machine
screws to ensure that the motor does not
come apart. Discard lockwashers.
GO TO NEXT PAGE