TM 5-3895-385-23-2
0413
Truck Hitch Extension Arm Removal
Figure 1. Truck Hitch Extension Arm -- Removal/Installation.
1. Remove cotter pin (Figure 1, Item 4) from hydraulic cylinder mounting pin (Figure 1, Item 1). Discard cotter
pin.
WARNING
The extension arm and wheel pivot arm guide weigh 115 pounds (lb) (52.2 kilograms (kg)). Three
personnel or a suitable lifting device is necessary to lift component. Failure to comply may cause
injury or death to personnel.
CAUTION
Properly support the item being lifted. Failure to comply may cause damage to equipment.
2. Remove hydraulic cylinder mounting pin (Figure 1, Item 1) from hydraulic cylinder (Figure 1, Item 3) and
remove extension arm (Figure 1, Item 5) from truck hitch (Figure 1, Item 2) with assistance.
END OF TASK