TM 5-3895-385-23-2
0398
BATTERY DISCONNECT SWITCH REMOVAL AND INSTALLATION
BATTERY DISCONNECT Switch Removal
Figure 1. BATTERY DISCONNECT Switch.
CAUTION
Tag and label electrical wires prior to removal. Electrical wires must be installed correctly for
proper operation. Failure to comply may cause damage to equipment.
1. Remove two nuts (Figure 1, Item 1), lock washers (Figure 1, Item 2), and three cables (Figure 1, Items 3, 10,
and 11) from BATTERY DISCONNECT switch (Figure 1, Item 4). Discard lock washers.
2. Remove screw (Figure 1, Item 9), flat washer (Figure 1, Item 8), and lever (Figure 1, Item 7) from BATTERY
DISCONNECT switch (Figure 1, Item 4).
3. Remove nut (Figure 1, Item 6) and BATTERY DISCONNECT switch (Figure 1, Item 4) from cover (Figure 1,
Item 5).
END OF TASK
