TM 5-3895-385-23-2
FIELD MAINTENANCE
BITUMINOUS MATERIAL PAVING MACHINE (BMPM)
NATO SLAVE RECEPTACLE REMOVAL AND INSTALLATION
INITIAL SETUP:
Tools and Special Tools
References
General Mechanics Tool Kit (GMTK) (WP 0440, Vol
3, Item 64)
Equipment Conditions
Materials/Parts
Batteries disconnected (WP 0357)
Lock washer (6) (WP 0439, Vol 3, Item 106)
Engine cool
Lock washer (10) (WP 0439, Vol 3, Item 114)
Estimated Time to Complete Task
Personnel Required
1.5 hr
91L
NORTH ATLANTIC TREATY ORGANIZATION (NATO) SLAVE RECEPTACLE REMOVAL AND
INSTALLATION
WARNING
NATO slave receptacle is electrically live at all times and is not protected by a fuse. This circuit is
only dead when the batteries are fully disconnected. Disconnect both batteries before performing
maintenance on the slave receptacle. Failure to comply may cause injury or death to personnel.
CAUTION
Tag and label all electric cables and connections prior to removal. Electric cables must be
installed correctly for proper operation. Failure to comply will cause damage to equipment.
NOTE
Figures 2 and 4 illustrate the NATO slave receptacle and the hydraulic cover vent from the
reverse side.
