TM 5-3895-385-23-2
0376
Main Manifold Wiring Harness Removal -- Continued.
1. Disconnect W10 J1 (Figure 1, Item 6) from W1 J8 (Figure 1, Item 1).
2. Disconnect W10 J2 (Figure 1, Item 4) from W1 J38 (Figure 1, Item 3).
3. Disconnect W10 J5 (Figure 1, Item 5) from W1 J19 (Figure 1, Item 2).
4. Disconnect W10 J8 (Figure 1, Item 24) from hopper up hydraulic solenoid (Figure 1, Item 23).
5. Disconnect W10 J4 (Figure 1, Item 25) from auger down hydraulic solenoid (Figure 1, Item 22).
6. Disconnect W10 J9 (Figure 1, Item 26) from left cutoff open hydraulic solenoid (Figure 1, Item 21).
7. Disconnect W10 J10 (Figure 1, Item 27) from left extension out hydraulic solenoid (Figure 1, Item 20).
8. Disconnect W10 J11 (Figure 1, Item 28) from left tow up hydraulic solenoid (Figure 1, Item 19).
9. Disconnect W10 J12 (Figure 1, Item 29) from right tow up hydraulic solenoid (Figure 1, Item 18).
10. Disconnect W10 J13 (Figure 1, Item 30) from right cutoff open hydraulic solenoid (Figure 1, Item 17).
11. Disconnect W10 J14 (Figure 1, Item 31) from right extension out hydraulic solenoid (Figure 1, Item 16).
12. Disconnect W10 J15 (Figure 1, Item 32) from left slope up hydraulic solenoid (Figure 1, Item 15).
13. Disconnect W10 J16 (Figure 1, Item 33) from right slope up hydraulic solenoid (Figure 1, Item 14).
14. Disconnect W10 J19 (Figure 1, Item 34) from truck hitch in hydraulic solenoid (Figure 1, Item 13).
15. Disconnect W10 J6 (Figure 1, Item 35) from crown down hydraulic solenoid (Figure 1, Item 12).
16. Disconnect W10 J18 (Figure 1, Item 36) from screed down hydraulic solenoid (Figure 1, Item 11).
17. Disconnect W10 J17 (Figure 1, Item 37) from screed up hydraulic solenoid (Figure 1, Item 10).
18. Remove bolt (Figure 1, Item 7), flat washer (Figure 1, Item 8), and three ground wires (Figure 1, Item 9) from
main manifold.
0376-3
