TM 5-3895-385-23-2
0372
HORN REMOVAL AND INSTALLATION
Horn Removal
Figure 1. Horn.
CAUTION
Tag and label electrical cables prior to removal. Electrical cables must be installed correctly for
proper operation. Failure to comply may cause damage to equipment.
1. Disconnect three electrical cables (Figure 1, Item 2) from horn connectors (Figure 1, Item 1).
2. Remove bolt (Figure 1, Item 5), lock washer (Figure 1, Item 4), ground wire (Figure 1, Item 6), and horn
(Figure 1, Item 3) from bracket (Figure 1, Item 7). Discard lock washer.
END OF TASK
Horn Installation
1. Install bolt (Figure 1, Item 5), new lock washer (Figure 1, Item 4), ground wire (Figure 1, Item 6), and horn
(Figure 1, Item 3) onto bracket (Figure 1, Item 7).
2. Connect three electrical cables (Figure 1, Item 2) to horn connectors (Figure 1, Item 1).
END OF TASK