TM 5-3895-385-23-2
0370
Hydraulic Generator Removal -- Continued.
CAUTION
Tag and label electrical wires prior to removal. Electrical wires must be installed correctly for
proper operation. Failure to comply may cause damage to equipment.
4. Remove screw (Figure 2, Item 8) and ground wire (Figure 2, Item 7) from hydraulic generator.
5. Remove four nuts (Figure 2, Item 1), two flat washers (Figure 2, Item 2), and electrical wires (Figure 2, Item 9)
from electrical posts (Figure 2, Item 6).
6. Remove nut (Figure 2, Item 5) from connection point (Figure 2, Item 3).
7. Remove wires (Figure 2, Item 4) from hydraulic generator.
0370-5