TM 5-3895-385-23-2
0324
CRANKSHAFT FRONT OIL SEAL REMOVAL AND INSTALLATION
Crankshaft Front Oil Seal Removal
Figure 1. Crankshaft Pulley -- Removal.
CAUTION
Make sure to mark the front of the crankshaft with the Top Dead Center (TDC) mark on the front
of the pulley for proper alignment for installation. Failure to comply may cause damage to
equipment.
1. Remove six bolts (Figure 1, Item 4), spacer (Figure 1, Item 3), and crankshaft pulley (Figure 1, Item 2) from
crankshaft nose (Figure 1, Item 1) to expose crankshaft front oil seal (Figure 1, Item 5).