TM 5-3895-385-23-2
0315
Brake Hydraulic Solenoid Coil Removal -- Continued.
1. Remove W1 J21 (Figure 1, Item 1) from brake hydraulic solenoid coil (Figure 1, Item 3).
NOTE
It may be necessary to remove the brake hydraulic solenoid coil and 2-way poppet together due
to clearance issues. Access can be obtained through the right side of the engine bay.
2. Remove nut (Figure 1, Item 2), brake hydraulic solenoid coil (Figure 1, Item 3), and 2-way poppet (Figure 1,
Item 4) from hopper wing sequence manifold (Figure 1, Item 5).
END OF TASK
Brake Hydraulic Solenoid Coil Installation
NOTE
It may be necessary to install the brake hydraulic solenoid coil and 2-way poppet together due to
clearance issues. Access can be obtained through the right side of the engine bay.
1. Install nut (Figure 1, Item 2), brake hydraulic solenoid coil (Figure 1, Item 3), and 2-way poppet (Figure 1, Item
4) onto hopper wing sequence manifold (Figure 1, Item 5).
2. Install W1 J21 (Figure 1, Item 1) onto brake hydraulic solenoid coil (Figure 1, Item 3).
END OF TASK
FOLLOW-ON TASK
1. Install engine hood assembly (WP 0433).
2. Connect batteries (WP 0357).
3. Verify proper operation.
4. Dispose of hydraulic oil and wiping rags In Accordance With (IAW) local Standard Operating Procedure
(SOP).
END OF TASK
END OF WORK PACKAGE
0315-3/4 blank