TM 5-3895-385-23-2
0297
Auger Lift Hydraulic Cylinder Hoses Removal -- Continued.
CAUTION
Tag and label hydraulic hoses prior to removal. Hydraulic hoses must be installed correctly for
proper operation. Failure to comply may cause damage to equipment.
1. Disconnect hydraulic hose 89 (Figure 1, Item 11), hydraulic hose 88 (Figure 1, Item 13), hydraulic hose 80
(Figure 1, Item 9), hydraulic hose 81 (Figure 1, Item 8), hydraulic hose 76 (Figure 1, Item 1), and hydraulic
hose 77 (Figure 1, Item 3) from hydraulic manifold (Figure 1, Item 12).
2. Disconnect hydraulic hose 89 (Figure 1, Item 11) and hydraulic hose 88 (Figure 1, Item 13) from hydraulic
cylinder (Figure 1, Item 14).
3. Disconnect hydraulic hose 76 (Figure 1, Item 1) and hydraulic hose 77 (Figure 1, Item 3) from hydraulic
cylinder (Figure 1, Item 2).
4. Remove three bolts (Figure 1, Item 7), bracket (Figure 1, Item 6), four spacers (Figure 1, Item 5), hydraulic
hose 76 (Figure 1, Item 1), and hydraulic hose 77 (Figure 1, Item 3) from Bituminous Material Paving Machine
(BMPM) (Figure 1, Item 4).
5. Disconnect hydraulic hose 80 (Figure 1, Item 9) and hydraulic hose 81 (Figure 1, Item 8) from bulkhead
(Figure 1, Item 10).
6. Cap/plug hydraulic hoses and hydraulic fittings.
END OF TASK
Auger Lift Hydraulic Cylinder Hoses Inspection
1. Inspect hydraulic hoses and fittings for cracks, holes, wear, or deformities. Replace hydraulic hoses if
damaged.
2. Inspect hydraulic fittings on hydraulic cylinders, bulkheads, manifolds, and hoses for cracks, stripped
threading, wear or deformities. Replace component if damaged.
END OF TASK
Auger Lift Hydraulic Cylinder Hoses Installation
1. Remove caps/plugs from hydraulic hoses and hydraulic fittings.
2. Connect hydraulic hose 89 (Figure 1, Item 11) and hydraulic hose 88 (Figure 1, Item 13) onto hydraulic
cylinder (Figure 1, Item 14).
3. Connect hydraulic hose 76 (Figure 1, Item 1) and hydraulic hose 77 (Figure 1, Item 3) onto hydraulic cylinder
(Figure 1, Item 2).
4. Install three bolts (Figure 1, Item 7), bracket (Figure 1, Item 6), four spacers (Figure 1, Item 5), hydraulic hose
76 (Figure 1, Item 1), and hydraulic hose 77 (Figure 1, Item 3) onto BMPM (Figure 1, Item 4).
5. Connect hydraulic hose 80 (Figure 1, Item 9) and hydraulic hose 81 (Figure 1, Item 8) onto bulkhead (Figure
1, Item 10).
6. Connect hydraulic hose 89 (Figure 1, Item 11), hydraulic hose 88 (Figure 1, Item 13), hydraulic hose 80
(Figure 1, Item 9), hydraulic hose 81 (Figure 1, Item 8), hydraulic hose 76 (Figure 1, Item 1), and hydraulic
hose 77 (Figure 1, Item 3) onto hydraulic manifold (Figure 1, Item 12).
END OF TASK
