TM 5-3895-385-23-2
0270
WORKLIGHTS ROCKER SWITCH REMOVAL AND INSTALLATION
Worklights Rocker Switch Removal
Figure 1. Worklights Rocker Switch
WARNING
Direct Current (DC) voltages are present at Bituminous Material Paving Machine (BMPM)
electrical components even when the unit is shut down. Avoid shorting any positive with
ground/negative. Do not ground yourself in standing water. Failure to comply may cause injury or
death to personnel and damage to equipment.
1. Disconnect cables (Figure 1, Item 3) from worklights rocker switch (Figure 1, Item 1).
2. Press two retention tabs (Figure 1, Item 2), and remove worklights rocker switch (Figure 1, Item 1) from
pedestal assembly.
END OF TASK