TM 5-3895-385-23-2
0259
Hopper Front Flashing Removal -- Continued.
WARNING
Support components when removing/installing the attaching hardware or when component may
fall. Failure to comply may cause injury or death to personnel and damage to equipment.
Remove five locking nuts (Figure 2, Item 5), flat washers (Figure 2, Item 4), front rubber mount bar (Figure 2, Item
3), and hopper front flashing (Figure 2, Item 2) from BMPM (Figure 2, Item 1). Discard locking nuts.
END OF TASK
Hopper Front Flashing Installation
Install five new locking nuts (Figure 2, Item 5), flat washers (Figure 2, Item 4), front rubber mount bar (Figure 2,
Item 3), and hopper front flashing (Figure 2, Item 2) onto BMPM (Figure 2, Item 1).
END OF TASK
FOLLOW-ON TASK
1. Set BATTERY DISCONNECT switch to ON (TM 5-3895-385-10).
2. Verify proper operation.
END OF TASK
END OF WORK PACKAGE