TM 5-3895-385-23-1
0166
Table 1. Beacon Relay Fault Troubleshooting Procedures -- Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2. Measure for continuity (WP
1. If continuity is present, proceed
0443, Vol 3) between main
to next malfunction.
wiring harness W1 J1 Pin 40 and
main wiring harness W1 J4 Pin
21 (WP 0451, Vol 3, Figures 1
and 3).
2. If no continuity is present,
replace main wiring harness
(WP 0373, Vol 2).
6. Main wiring harness has a short
Measure continuity (WP 0443, Vol
1. If continuity is present, replace
circuit.
3) between main wiring harness W1
main hydraulic manifold wiring
J4 Pin 21 and all other pins on the
harness (WP 0373, Vol 2).
main wiring harness W1 J4 (WP
0451, Vol 3, Figure 3).
2. If no continuity is present,
replace screed controller module
ECM (WP 0399, Vol 2).
END OF WORK PACKAGE
0166-3/4 blank
