TM 5-3895-385-23-1
0163
Table 1. Worklight Fails to Operate Troubleshooting Procedures -- Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2. If voltage reads a minimum of 22
VDC, turn keyless engine switch
to the OFF position (TM 5-3895-
385-10), and replace worklight
lightbulb (WP 0397, Vol 2).
4. Measure voltage (WP 0443, Vol
1. If voltage reads below 22 VDC,
3) from known good ground to
turn keyless engine switch to
W1 J40 pin 1 on main wiring
the OFF position (TM 5-3895-
harness (WP 0451, Vol 3, Figure
385-10), and replace main
8).
wiring harness (WP 0373, Vol
2).
2. If voltage reads a minimum of 22
VDC, turn keyless engine switch
to the OFF position (TM 5-3895-
385-10), and replace worklight
lightbulb (WP 0397, Vol 2).
5. Measure voltage (WP 0443, Vol
1. If voltage reads below 22 VDC,
3) from known good ground to
turn keyless engine switch to
W1 J42 pin 1 on main wiring
the OFF position (TM 5-3895-
harness (WP 0451, Vol 3, Figure
385-10) and replace main wiring
8).
harness (WP 0373, Vol 2).
2. If voltage reads a minimum of 22
VDC, turn keyless engine switch
to the OFF position (TM 5-3895-
385-10) and replace worklight
Lightbulb (WP 0397, Vol 2).
6. Measure voltage (WP 0443, Vol
1. If voltage reads below 22 VDC,
3) from known good ground to
turn keyless engine switch to
W1 J41 pin 1 on main wiring
the OFF position (TM 5-3895-
harness (WP 0451, Vol 3, Figure
385-10), and replace main
8).
wiring harness (WP 0373, Vol
2).
2. If voltage reads a minimum of 22
VDC, turn keyless engine switch
to the OFF position (TM 5-3895-
385-10), and replace worklight
lightbulb (WP 0397, Vol 2).
7. Measure voltage (WP 0443, Vol
1. If voltage reads below 22 VDC,
3) from known good ground to
turn keyless engine switch to
W1 J51 pin 1 on main wiring
the OFF position (TM 5-3895-
harness (WP 0451, Vol 3, Figure
385-10), and replace main
8).
wiring harness (WP 0373, Vol
2).
0163-3