TM 5-3895-385-23-1
0113
Table 1. Right Screed Slope Fail to Raise Troubleshooting Procedures -- Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
6. Loss of hydraulic pressure.
1. Attach hydraulic pressure tester
(WP 0442, Vol 3) to hydraulic
hose 97B at right screed slope
hydraulic cylinder (WP 0285, Vol
2).
2. Start BMPM engine (TM 5-3895-
385-10).
3. Press right screed slope lower
key on screed control (TM 5-
3895-385-10).
4. Check hydraulic pressure (WP
1. If hydraulic pressure reads a
0442, Vol 3) at hydraulic hose
minimum of 1800 psi (12,410
97B at right screed slope
kPa), turn keyless engine switch
hydraulic cylinder (WP 0285, Vol
to the OFF position (TM 5-3895-
2) while pressing right screed
385-10) and replace the right
slope lower key on screed
screed slope hydraulic cylinder
control.
(WP 0255, Vol 2).
2. If pressure reads below 1800 psi
(12,410 kPa), turn keyless
engine switch to the OFF
position (TM 5-3895-385-10) and
replace screed slope hydraulic
hose (WP 0285, Vol 2 and WP
0289, Vol 2).
END OF WORK PACKAGE
0113-4