TM 5-3895-385-23-1
0112
Table 1. Left Tow Fails to Raise Troubleshooting Procedures -- Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2. If pressure reads below 1800 psi
(12,410 kPa), turn keyless
engine switch to the OFF
position (TM 5-3895-385-10) and
replace left tow point hydraulic
solenoid (WP 0312, Vol 2).
6. Loss of hydraulic pressure.
1. Attach hydraulic pressure tester
(WP 0442, Vol 3) to hydraulic
hose 43A at left tow point
hydraulic cylinder (WP 0281, Vol
2).
2. Start BMPM engine (TM 5-3895-
385-10).
3. Press left tow point raise key on
screed control (TM 5-3895-385-
10).
4. Check hydraulic pressure (WP
1. If hydraulic pressure reads a
0442, Vol 3) at hydraulic hose
minimum of 1800 psi (12,410
43A at left tow point hydraulic
kPa), turn keyless engine switch
cylinder (WP 0281, Vol 2) while
to the OFF position (TM 5-3895-
pressing left tow lower key on
385-10) and replace the left tow
screed control.
point hydraulic cylinder (WP
0231, Vol 2).
2. If pressure reads below 1800 psi
(12,410 kPa), turn keyless
engine switch to the OFF
position (TM 5-3895-385-10),
and replace hydraulic hose 43A
(WP 0281, Vol 2).
END OF WORK PACKAGE
0112-4
