TM 5-3895-385-10
0015
BOLT-ON SCREED EXTENSION KIT REMOVAL -- CONTINUED.
7. Remove bolt (Figure 2, Item 3), nut (Figure 2, Item 10), and auger shaft cap (Figure 2, Item 1) from 2-ft auger
extension L or R (Figure 2, Item 2).
8. Install bolt (Figure 2, Item 3) and nut (Figure 2, Item 10) onto 2-ft auger extension L or R (Figure 2, Item 2) for
storage.
9. Remove bolt (Figure 2, Item 4) and nut (Figure 2, Item 9) from 4-ft auger extension L or R (Figure 2, Item 5).
WARNING
The 2-ft auger extension weighs 89 pounds (lb) (40 kilograms (kg)). Two personnel are required
to lift component. Failure to comply may cause injury or death to personnel.
CAUTION
Do not drop item being lifted. Failure to comply may cause damage to equipment.
10. Remove 2-ft auger extension L or R (Figure 2, Item 2) from 4-ft auger extension L or R (Figure 2, Item 5) with
assistance.
11. Install bolt (Figure 2, Item 4) and nut (Figure 2, Item 9) onto 2-ft auger extension L or R (Figure 2, Item 2) for
storage.
12. Remove bolt (Figure 2, Item 7) and nut (Figure 2, Item 8) from auger (Figure 2, Item 6).
WARNING
The 4-ft auger extension weighs 170 lb (77 kg). Four personnel are required to lift component.
Failure to comply may cause injury or death to personnel.
CAUTION
Do not drop item being lifted. Failure to comply may cause damage to equipment.
13. Remove 4-ft auger extension L or R (Figure 2, Item 5) from auger (Figure 2, Item 6) with assistance.
14. Install auger shaft cap (Figure 2, Item 1), bolt (Figure 2, Item 7), and nut (Figure 2, Item 8) onto auger (Figure
2, Item 6).
0015-5
