TM 5-3895-385-10
0006
SPRAYDOWN PROCEDURES -- CONTINUED.
6. Turn on BMPM engine (perform Starting the Engine task).
7. Turn on augers and conveyors (perform steps 1 and 3 of Adjust Auger/Conveyor Speed Using Manual Speed
Auger/Conveyor Setting).
WARNING
There are m any points o n the BMPM whe re personnel could b e injured by moving pa rts. Care
should be ta ken to avoid any pinch p oints when performing spraydown pro cedure. Failure to
comply may cause injury or death to personnel.
CAUTION
Do not allow spraydown wand to touch any movi ng parts of the BMPM. Failure to compl y will
result in damage to equipment.
8. Squeeze the wand handle (Figure 37, Item 1) to spray conveyor chains (Figure 38, Item 3), idler pulleys
(Figure 38, Item 1), and augers (Figure 38, Item 8), and release wand handle when done spraying.
9. Turn off augers and conveyors (perform steps 1 and 3 of Adjust Auger/Conveyor Speed Using Manual Speed
Auger/Conveyor Setting).
10. Press the spraydown key (Figure 36, Item 1) to turn off spraydown pump.
11. Turn keyless engine switch to the OFF position (WP 0004).
12. Retract spraydown hose (Figure 37, Item 3) using hose reel (Figure 37, Item 2).
13. Return wand handle (Figure 37, Item 1) to storage bracket (Figure 37, Item 4).
END OF TASK
END OF WORK PACKAGE
0006-45/46 blank
