TM 5-3895-385-10
0006
ADJUST AUGER/CONVEYOR SPEED USING MANUAL AUGER/CONVEYOR SETTING
Figure 20. Screed Control -- Manual Pile Height.
1. Press and release desired (left or right) auger/conveyor ON/OFF key (Figure 20, Item 1) until LED indicates
ON is selected. Engine speed will automatically raise to 1500 rpm.
2. Press and release desired (left or right) auger/conveyor auto/man key (Figure 20, Item 2) until Light Emitting
Diode (LED) indicates manual is selected.
3. Press and hold desired (left or right) material height auger/conveyor speed minus (-) key (Figure 20, Item 4) to
slow the speed of the auger and conveyor until desired speed is reached, and then release key.
4. Press and hold desired (left or right) material height auger/conveyor speed plus (+) key (Figure 20, Item 3) to
increase the speed of the auger and conveyor until desired speed is reached, and then release key.
5. Press and release desired (left or right) auger/conveyor ON/OFF key (Figure 20, Item 1) until LED indicates
OFF is selected to turn off augers and conveyors.
END OF TASK
