TM 5-3895-385-10
0006
REMOVING SONIC AUGER SENSOR
1. Remove sonic auger connector (Figure 12, Item 4) from socket (Figure 12, Item 6).
2. Install cap (Figure 12, Item 7) onto sonic auger connector (Figure 12, Item 4) on sonic auger sensor.
3. Install cap (Figure 12, Item 5) onto socket (Figure 12, Item 6) on BMPM.
4. Loosen wing screw (Figure 12, Item 3), and remove sonic auger sensor (Figure 12, Item 1) from sonic auger
sensor mount (Figure 12, Item 2).
5. Store sonic auger sensor in BMPM toolbox (WP 0002).
END OF TASK
