TM 5-3895-373-34
D.
ASSEMBLE.
1.
CLEAN
CYLINDER
AND
PISTON
COMPONENTS.
WARNING
Cleaning solvent, P-D-680, is TOXIC
and flammable. Wear protective
goggles and gloves.
Use only in a well ventilated area.
Avoid contact with skin, eyes, and
clothes, and do not breathe vapors.
Keep away from heat or flame. Never
smoke
when
using
solvent;
the
flashpoint
for
Type
Im
cleaning
solvent is 200°F (93,3°C). Failure to
do so may result in injury or death to
personnel.
If personnel become dizzy while
using cleaning solvent, immediately
get fresh air and medical help. If
solvent contacts skin or clothes,
flush with cold water. If solvent
contacts eyes, flush eyes with water
and get immediate medical attention.
a.
Rinse cylinder tube and piston components in
cleaning solvent.
WARNING
Compressed
air
for
cleaning
purposes will not exceed 30 psi (207
kPa). Use only with effective chip
guarding and personal protective
equipment (goggles/face shield and
gloves). Failure to take proper
precautions may result in severe
injury or loss of vision.
b.
Use 30 psi (207 kPa) maximum compressed air
to blow any foreign material from seal grooves,
inside surfaces of cylinder tube, and threaded
surfaces.
c.
Dry parts with compressed air and a clean, lint-
free cloth. Set dry parts on clean surface. Place
a clean, lint-free cloth in open ends of cylinder
tube to prevent contamination.
GO TO NEXT PAGE
2-695
