TM 5-3895-373-34
2.53
REPLACE/REPAIR HYDRAULIC RESERVOIR COMPONENTS.
This task covers:
a. Remove
b. Clean
c.
Install
INITIAL SETUP:
Tools:
Personnel Required:
General mechanic’s automotive tool kit
Two 62B construction equipment repairers. Second person to
(Item 106, Appendix D)
assist with removing and installing hydraulic reservoir.
Combination wrench (Item 115, Appendix D)
Combination wrench (Item 116, Appendix D)
References:
Crowbar (Item 36, Appendix D)
TM 5-3895-373-20
Pipe wrench (Item 117, Appendix D)
TM 5-3895-373-24P
Sling strap, 2 ea (Item 98, Appendix D)
Torque wrench, 0 to 175 lb-ft (Item 132, Appendix D)
Equipment Condition:
Torque wrench, 150 to 750 lb-in. (Item 130, Appendix D)
Hydraulic reservoir drained per TM 5-3895-373-20.
Engine removed per paragraph 2.16.
Materials/Parts:
Fuel tank removed per paragraph 2.22.
Cleaning cloths (Item 6, Appendix B)
Rear top right access door opened per TM 5-3895-373-10.
Cleaning solvent (Item 31, Appendix B)
Hydraulic fitting sealant (Item 26, Appendix B)
Hydraulic oil (Item 21, Appendix B)
Lint-free cloth (Item 7, Appendix B)
Pipe cleaner (Item 25, Appendix B)
Pipe sealant (Item 27, Appendix B)
Protective caps (Item 3, Appendix B)
Tags (Item 34, Appendix B)
Thread locking compound (Item 13, Appendix B)
Thread locking compound solvent (Item 32, Appendix B)
Filler opening cap assembly
Gasket
Lockwashers
Sight liquid indicator
Strainer elements
GO TO NEXT PAGE
2-699
