TM 5-3895-373-34
2.41
REPLACE TRACK CHAIN ASSEMBLY - Continued.
A.
REMOVE - Continued.
WARNING
Cleaning solvent, P-D-680, is TOXIC
and flammable. Wear protective
goggles and gloves.
Use only in a well ventilated area.
Avoid contact with skin, eyes, and
clothes, and do not breathe vapors.
Keep away from heat or flame. Never
smoke
when
using
solvent;
the
flashpoint of Type
m
cleaning
solvent is 200°F (93,3°C). Failure to
do so may result in injury or death to
personnel.
If personnel become dizzy while
using cleaning solvent, immediately
get fresh air and medical help. If
solvent contacts skin or clothes,
flush with cold water. If solvent
contacts eyes, flush eyes with water
and get immediate medical attention.
CAUTION
Thoroughly clean hydraulic hoses,
tubes,
and
fittings
before
disconnecting. Always plug or cap
off disconnected fittings to prevent
intrusion of contaminants. Failure to
properly
clean
and
cap
off
connectors may result in hydraulic
system contamination and equipment
damage.
d.
Use cleaning solvent and cleaning cloth to clean
all dust, dirt, and oil or grease residue from
hydraulic fittings at accumulator (1).
e.
Place drip pan on track below hose (2) and
elbow (3) at accumulator (1).
GO TO NEXT PAGE
2-560
