TM 5-3895-373-34
B.
REPAIR - Continued.
NOTE
Use bench vise, as required, to
support valve during assembly of
rotary valve and linear valve.
Hydraulic
oil
can
be
moderately
flammable and can be an irritant to
the
skin,
eyes,
and
respiratory
system. Avoid prolonged exposure.
Eye protection and rubber gloves
must be worn when working with
hydraulic oil.
c.
Lubricate interior of valve body (9) with
clean hydraulic oil. Thread rotary valve (8)
into valve body and tighten until snug. Do
not over tighten.
d.
Install linear valve (7).
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
e.
Apply thread locking compound to threads
on rotary valve (8) stem.
f.
Install hex nut (6). Tighten hex nut to 14 lb-
in (1,6 N•m).
GO TO NEXT PAGE
2-377
