TM 5-3895-373-34
2.19
REPLACE/REPAIR FUEL INJECTION PUMP - Continued.
G.
INSTALL- Continued.
2.
INSTALL FUEL INJECTION PUMP ONTO
ENGINE.
a.
Install gasket (17) onto fuel injection pump
(16).
b.
Locate position of dowel pin through bore
on fuel injection pump gear.
c.
Rotate drive hub of fuel injection pump (16)
to line up slot in drive hub with dowel pin in
fuel injection pump gear.
d.
Install fuel injection pump on engine timing
gear case. Ensure dowel pin in fuel
injection pump gear mates with slot in drive
hub of fuel injection pump.
e.
Install flat washers (15), lockwashers (14),
and hex nuts (13). Do not tighten hex nuts.
GO TO NEXT PAGE
2-288
