TM 5-3895-373-34
D.
REPAIR - Continued.
(4)
Slide connection (166) onto shaft
(167). Position connection in center of
shaft.
(5)
Install shims (165).
(6)
Install springs (164).
(7)
Install rocker arms (161 and 160) and
brackets (162).
(8)
Install springs (163).
(9)
Install rocker arms (161 and 160) and
brackets (162).
(10) Install thrust washer bearings (159).
Use care when installing snap and
retaining rings. Snap and retaining
rings are under spring tension and
can act as projectiles when released
and could cause severe eye injury.
(11) Install retaining rings (158) by pressing
over flanged end of shaft (167).
(12) Install
rocker
shaft
assembly
per
paragraph 2.15.
GO TO NEXT PAGE
2-187
