14.4. REPLACE SCREED FUEL SYSTEM HOSES AND FITTINGS

1. REMOVE PUMPING SYSTEM HOSES AND FITTINGS

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
965

TM 5-3895-373-20 14.4. REPLACE SCREED FUEL SYSTEM HOSES AND FITTINGS. This task covers: a. Remove b. Install INITIAL SETUP Tools: Personnel Required: General mechanic’s automotive tool kit Two 62B construction equipment repairers. Second person (Item 54, Appendix E) required to operate fuel spray wand during pump bleed Drip pan (Item 28, Appendix E) operation. Torque wrench (Item 68, Appendix E) Utility pails, 2 ea. (Item 26, Appendix E) References: TM 5-3895-373-10 Materials/Parts: TM 5-3895-373-24P Cleaning cloth (Item 7, Appendix C) Hydraulic fitting sealant (Item 21, Appendix C) Equipment Condition: Machinery wiping towel (Item 30, Appendix C) Rear top left access door open per TM 5-3895-373-10. Pipe sealant (Item 22, Appendix C) Rear top right access door open per TM 5-3895-373-10. Protective caps (Item 5, Appendix C) Front top left access door open per TM 5-3895-373-10. Thread locking compound (Item 13, Appendix C) Fuel tank level drained to no more than 3/4 full per paragraph Thread locking compound solvent (Item 25, Appendix C) 2.23.4 (if replacing screed fuel system hoses and fittings). Tie wraps (Item 29, Appendix C) Self-locking machine screws Lockwashers GO TO NEXT PAGE 14-15

Privacy Statement
Press Release
Contact