TM 5-3895-373-20 14.4. REPLACE SCREED FUEL SYSTEM HOSES AND FITTINGS - Continued. B. INSTALL. 1. INSTALL    SCREED    BURNER    FUEL    HOSES AND FITTINGS. WARNING Thread    locking    compound    solvent can  cause  eye  damage.    Wear  safety goggles/glasses  when  using.    Avoid contact with eyes.  If solvent contacts eyes, flush with water and get immediate medical attention. a. Clean threads of hex head cap screws and bolts    (23    and    29)    with    thread    locking compound solvent. b. Use  cleaning  cloths  to  wipe  residue  from threads on all fuel hoses and adapters to be reinstalled. WARNING Pipe  sealant  can  cause  eye  damage or   skin   irritation.      Wash   after   skin contact.  Wear safety goggles/glasses when using.  Avoid contact with eyes or   skin.      If   sealant   contacts   eyes, flush eyes with water and get immediate medical attention. CAUTION Do  not  apply  pipe  sealant  to  leading threads of adapters or pipe nipples in screed   burner   system.      Seepage   of pipe   sealant   into   fuel   system   may clog fuel nozzle. NOTE Adapter pipe thread fittings are coded P    in    illustration.        P-coded    fittings require   pipe   sealant.      Adapter   hose end  fittings  are  coded  H,  and  require hydraulic fitting sealant. c. Apply  pipe  sealant  to  P-coded  threads  of adapters  and  pipe  nipples.    Do  not  apply pipe sealant to leading threads. WARNING Hydraulic   fitting   sealant   can   cause eye  damage  or  skin  irritation.    Wash after     skin     contact.          Wear     safety goggles/glasses  when  using.    Avoid contact  with  eyes  or  skin.    If  sealant contacts  eyes,  flush  eyes  with  water and get immediate medical attention. CAUTION Do not apply hydraulic  fitting  sealant to leading threads of adapters. Seepage   of   hydraulic   fitting   sealant into fuel system may clog fuel nozzle. d. Apply   hydraulic   fitting   sealant   to   H-coded threads of adapters. e. Install  pipe  nipples  and  adapters.    Position elbows    (13    and    20)    as    shown    in    the illustration.  Tighten all fittings. f. Route   hoses   as   shown   and   connect   to adapter fittings.  Tighten hose fittings. LEGEND 12. Fuel hose 18. Straight adapter 25. Flat washer 32. Solenoid valve 13. Elbow 19. Fuel hose 26. Clamp 33. Pipe nipple 14. Straight adapter 20. Elbow 27. Fuel hose 34. Pipe nipple 15. Screed burner fuel 21. Pipe nipple 28. Straight adapter 35. Pipe bushing shutoff valve 22. Tie wrap 29. Bolt 36. Quick disconnect 16. Elbow 23. Hex head cap screw 30. Lockwasher coupler 17. Fuel hose 24. Lockwasher 31. Fuel manifold GO TO NEXT PAGE 14-20