TM 5-3895-373-20
C.
INSTALL.
1.
INSTALL FUEL FILTER ASSEMBLY.
a.
Install fuel filter assembly (1) on mounting
bracket (7).
b.
Secure with hose clamps (6).
2.
CONNECT FUEL FILTER HOSES.
WARNING
Hydraulic fitting sealant can cause
eye damage or skin irritation. Wash
after skin contact. Wear safety
goggles/glasses when using. Avoid
contact with eyes or skin. If sealant
contacts eyes, flush eyes with water
and get immediate medical attention.
a.
Apply hydraulic fitting sealant to threads of
elbows (4 and 5).
WARNING
Fuel is very flammable and can
explode easily. To avoid serious
injury or death:
Always wear safety glasses/goggles
at all times.
Keep fuel away from open flame or
spark (ignition source).
Keep at least a B-C fire extinguisher
within easy reach when working with
fuel or on a fuel system.
Post signs that read "NO SMOKING
WITHIN 50 FEET" when working with
open fuel lines or fuel tanks.
b.
Connect fuel filter hoses (2 and 3) to elbows
(4 and 5) and tighten hose.
NOTE
FOLLOW-ON-TASKS:
Bleed burner and fuel spray fuel system per paragraph 2.23.11.
Close rear top left access door per TM 5-3895-373-10.
END OF TASK
14-13/(14-14 blank)
