7.9. REPAIR SWITCH PANEL ASSEMBLY

2. REMOVE SWITCH PANEL SWITCHES AND HORN SWITCH FROM SWITCH PANEL

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
721

TM 5-3895-373-20 7.9. REPAIR SWITCH PANEL ASSEMBLY. This task covers: a. Remove b. Install INITIAL SETUP Tools: References: General mechanic’s automotive tool kit TM 5-3895-373-24P (Item 54, Appendix E) Jeweler’s screwdriver set (Item 38, Appendix E) Equipment Condition: Switch panel removed from operator control console assembly Materials/Parts: per paragraph 7.6. Electrical insulating compound (Item 11, Appendix C) Electrical insulating varnish (Item 32, Appendix C) Tags (Item 27, Appendix C) Dust and moisture boots Lockwashers Panel seal washer Switches A. REMOVE. 1. TAG AND REMOVE RING TERMINALS AND LUG TERMINALS FROM SWITCH PANEL COMPONENTS. Ensure wires and electrical connectors are tagged for reassembly. Paving machine functions will be affected by incorrect wiring installation. a. Tag all wires and connectors for reassembly. b. Remove terminal screws (1) and lockwashers (2) from switches using the jeweler’s screwdriver set. Discard lockwashers. c. Remove ring terminals (3) from switches. d. Remove lug terminals (4) from horn switch. e. Remove terminal screws (5) and ring terminals (3) from emergency stop switch. GO TO NEXT PAGE 7-79

Privacy Statement
Press Release
Contact