6.4. REPLACE COOLANT HOSES

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
631

TM 5-3895-373-20 6.4. REPLACE COOLANT HOSES. This task covers: a. Remove b. Replace INITIAL SETUP Tools: References: General mechanic’s automotive tool kit TM 5-3895-373-10 (Item 54, Appendix E) TM 5-3895-373-24P Materials/Parts: Equipment Condition: Bottom coolant hose Drain engine coolant per paragraph 2.23.3. Coolant bypass hose Hose clamps (If required) Top coolant hose A. REMOVE. 1. REMOVE UPPER COOLANT HOSE. a. Loosen hose clamps (1 and 2). b. Remove upper coolant hose (3). c. Remove hose clamps (1 and 2) from upper coolant hose (3). d. Discard upper coolant hose (3). 2. REMOVE COOLANT BYPASS HOSE. a. Loosen hose clamps (4 and 5). b. Remove coolant bypass hose (6). c. Remove hose clamps (4 and 5) from coolant bypass hose (6). d. Discard coolant bypass hose (6). 3. REMOVE LOWER COOLANT HOSE. a. Loosen hose clamps (7 and 8). b. Remove lower coolant hose (9). c. Remove hose clamps (7 and 8) from lower coolant hose (9). d. Discard lower coolant hose (9). GO TO NEXT PAGE 6-10

Privacy Statement
Press Release
Contact