TM 5-3895-373-20
4.8.
REPLACE FUEL/WATER SEPARATOR - Continued.
B.
CLEAN - Continued.
2.
CLEAN BOLT THREADS.
Thread locking compound solvent
can cause eye damage. Wear safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
a.
Clean threads of bolts with thread locking
compound solvent and a lint-free cloth.
b.
Wipe bolt threads dry with lint-free cloth.
C.
INSTALL.
1.
INSTALL PLUG SEALS, PLUGS, AND FUEL
LINES.
Fuel is very flammable and can
explode easily. To avoid serious
injury or death:
Always wear safety glasses/goggles
at all times.
Keep at least a B-C fire extinguisher
within easy reach when working with
fuel or on a fuel system.
Do not work on fuel system when
engine is hot; fuel can be ignited by a
hot engine.
Post signs that read "NO SMOKING
WITHIN 50 FEET" when working with
open fuel lines or fuel tanks.
a.
Install plug seals (5) on plugs (4). Install and
tighten plugs in fuel/water separator (1).
b.
Insert fuel output line into outlet port. Install and
tighten tube coupling nut (2).
c.
With fuel/water separator (1) above fuel tank,
insert fuel supply line into inlet port. Install and
tighten tube coupling nut (2). Secure fuel/water
separator above tank level.
GO TO NEXT PAGE
4-50
