TM 5-3895-373-20
4.3. REPLACEAIR INTAKE COMPONENTS - Continued.
C.
INSPECT - Continued.
b.
Inspect condition of baffle seating wall in air
cleaner intake (9). If seating wall is bent or
deformed, replace air cleaner intake.
CAUTION
Air intake components must be free
of leaks to prevent intake of sand,
or dust into turbosupercharger.
Make sure intake reducer, hose,
flexible tube, sense tube, baffle, and
air cleaner deflector are free of leaks.
Failure to ensure leakproof intake
components may result in serious
damage to turbosupercharger and
engine.
2.
INSPECT BAFFLE, VACUUM DIAPHRAGM
HOSES,
AND
REDUCER
FOR
CRACKS,
TEARS, OR HOLES.
a.
Inspect rubber baffle (8) for cracks, tears,
or missing material. Replace damaged
component.
b.
Inspect vacuum diaphragm (6), flexible
tube and hose (11 and 20), and reducer
(31) for cracks, tears, or holes. Replace
damaged components.
3.
INSPECT FLAT SPRING FOR CRACKS OR
DEFORMATION.
a.
Inspect flat spring (7) for cracks, breaks,
or missing material. Replace flat spring if
damaged.
b.
If flat spring (7) does not spring back when
bent, replace it.
GO TO NEXT PAGE
4-14
