TM 5-3895-373-20
4.3.
REPLACE/REPAIR
AIR
INTAKE
COMPONENTS - Continued.
A.
REMOVE - Continued.
6.
REMOVE
HOSE
CLAMP
(32)
AND
EXTENSION TUBE (33) FROM AIR
CLEANER CAP ASSEMBLY (34).
B.
CLEAN.
1.
CLEAN
METAL
AIR
CLEANER
COMPONENTS.
a.
Lightly tap air cleaner intake (9) and air
cleaner deflector (12) on wooden surface
to remove dust.
Cleaning solvent, PD680, is TOXIC
and flammable. Wear protective
goggles and gloves. Use only in a
well ventilated area. Avoid contact
with skin, eyes, and clothes, and do
not breathe vapors. Keep away from
heat or flame. Never smoke when
using solvent; the flashpoint for Type
m cleaning solvent is 200°F (93,3°C).
Failure to do so may result in injury
or death to personnel.
If personnel become dizzy while
using cleaning solvent, immediately
get fresh air and medical help. If
solvent contacts skin or clothes,
flush with cold water. If solvent
contacts eyes, flush eyes with water
and get immediate medical attention.
b.
Use cleaning cloths soaked with cleaning
solvent to wipe away dirt, grease, and oily
deposits from air cleaner intake (9), air
cleaner deflector (12), and clamp (1).
GO TO NEXT PAGE
4-12
