TM 5-3895-373-20
3.5.
REPLACE EXHAUST MANIFOLD AND INTAKE MANIFOLD.
This task covers:
a. Remove
b. Clean
c. Install
INITIAL SETUP
Tools:
Reference:
General mechanic’s automotive tool kit
TM 5-3895-373-24P
(Item 54, Appendix E)
Stud remover and setter (Item 50, Appendix E)
Equipment Condition:
Torque wrench (Item 68, Appendix E)
Front top left access door open per TM 5-3895-373-10.
Engine access cover removed per paragraph 2.22.
Materials/Parts:
Turbosupercharger assembly removed per paragraph 4.4.
Cleaning cloth (Item 7, Appendix C)
Cleaning solvent (Item 24, Appendix C)
Flat washers
Gaskets
Nuts
Turbosupercharger mounting studs
WARNING
Allow
engine
to
cool
before
performing
maintenance
on
the
muffler,
exhaust
pipe,
exhaust
manifold, or turbosupercharger. Do
not touch hot exhaust system with
bare hands; injury to personnel will
result. If maintenance of a heated
surface is necessary, use insulated
pads or gloves.
A.
REMOVE.
1.
REMOVE EXHAUST MANIFOLD.
a.
Remove and discard nuts (1) and flat
washers (2).
b.
Remove exhaust manifold (3) and gaskets
(4). Discard gaskets.
GO TO NEXT PAGE
3-19
