TM 5-3895-373-20
2.23.2. REPLACE ENGINE OIL FILTER ELEMENT - Continued.
A.
REMOVE.
WARNING
Cleaning solvent, P-D-680, is TOXIC
and flammable. Wear protective
goggles and gloves. Use only in a
well ventilated area. Avoid contact
with skin, eyes, and clothes, and do
not breathe vapors. Keep away from
heat or flame. Never smoke when
using solvent; the flashpoint for Type
HI cleaning solvent is 200°F (93,3C).
Failure to do so may result in injury
or death to personnel.
If personnel become dizzy while
using cleaning solvent, immediately
get fresh air and medical help. If
solvent contacts skin or clothes,
flush with cold water. If solvent
contacts eyes, flush eyes with water
and get immediate medical attention.
1.
CLEAN OUTSIDE OF ENGINE OIL FILTER/
COOLER ASSEMBLY (1) WITH A LINT-FREE
CLOTH MOISTENED IN CLEANING SOLVENT.
2.
PLACE MACHINERY WIPING TOWEL
UNDER OIL FILTER/COOLER ASSEMBLY (1)
TO CATCH ANY SPILLED ENGINE OIL.
3.
REMOVE OIL FILTER ELEMENT (2) USING
OIL FILTER REMOVAL TOOL.
4.
POUR
WASTE
OIL
FROM
OIL
FILTER
ELEMENT (2) INTO A DRIP PAN. DISPOSE
OF
WASTE
OIL,
CONTAMINATED
MACHINERY WIPING TOWELS, AND OIL
FILTER ELEMENT IN ACCORDANCE WITH
LOCAL PROCEDURES.
GO TO NEXT PAGE
2-394
