TM 5-3895-373-20A.REMOVE - Continued.2.REMOVE SCREED COVER PLATES.a.Remove and discard self-locking machinescrews (3).b.Remove cover plates (4 and 5).B.INSTALL.1.INSTALL SCREED COVER PLATES.a.Position cover plates (4 and 5) on screed.b.Install and tighten self-locking machinescrews (3).2.INSTALL ENGINE ACCESS COVER.WARNINGThread locking compound solventcan cause eye damage. Wear safetygoggles/glasses when using. Avoidcontact with eyes. If compoundcontacts eyes, flush eyes with waterand get immediate medical attention.a.Clean threads of socket head cap screws(1) with thread locking compound solvent.WARNINGThread locking compound can causeeye damage. Wear safetygoggles/glasses when using. Avoidcontact with eyes. If compoundcontacts eyes, flush eyes with waterand get immediate medical attention.b.Apply thread locking compound to threadsof socket head cap screws (1).c.Set engine access cover (2) in access portand install socket head cap screws (1).Tighten screws.END OF TASK2-389
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
