TM 5-3895-373-20
A.
REMOVE - Continued.
b.
Start the paving machine. Refer to TM 53895-
373-10.
c.
Have second person activate conveyor. When
drag bar (4) to be replaced is on top of conveyor
idler roller (5), signal second person to stop
conveyor.
d.
Shut off engine and remove key from ignition
switch. Refer to TM 5-3895-373-10.
NOTE
Buildup of asphalt paving material on
drag bars may need to be removed to
access spring pins.
e.
Use a 0.25 in. (0,635 mm) drive pin punch to
punch out spring pins (6) from conveyor drag
bar (4). Discard spring pins.
GO TO NEXT PAGE
15-61
