Figure 2-47. Remove/Install Top Case Bearings.

9. Disassembly of Burner Blower Drive Motor.

Figure 2-49. Remove/Install Lower Case Plate and Seal.

TM-5-3895-371-24P Melter Asphalt Skid Mounted Hot Oil Circulating 750 GPH Chausse Model STMD-3000A Manual
Page Navigation
106

TM 5-3895-371-24&P (3) Remove the two needle bearings (fig. 2-47) in the top case with a suitable puller or press, only if the bearings need replacing. Figure 2-47. Remove/Install Top Case Bearings. (4) Remove two pump gears (fig. 2-48) from the lower case half. Figure 2-48. Remove/Install Pump Gears. 2-99

Privacy Statement
Press Release
Contact