CHAPTER 6
REPAIR OF HYDRAULIC TANK
6-1. Removal.
a . Remove drain plug (7) from tank (6) and drain fluid below sight glass level (4) Cap (1)
breather (2), gage (3) and sight glass (4) may be removed and replaced. Fitting (8) tee (9) and sensor
unit (10) may be disconnected and replaced. Tank (6) and mounting brackets (5) may be replaced
or repaired with welds.
Remove four nuts (15), lockwashers (14), and hook bolts (12); remove brackets (13 and 11).
b.
Remove mounting brackets (5) from brackets (13 and 11) by removing four capscrews (16),
lockwashers (17), and nuts (18).
Figure 6-1. Disassemble/Reassemble Hydraulic lank.
6-1
