TM 5-3895-371-24 & P
Install new leather seal (24) and spring (23) on head (21).
h.
i.
Install spacer (25).
Install new leather seal (9) and spring (10) to head (26).
j.
Install heads (21) and (26) on piston rod (18) and secure with flat washer and nut (7).
k.
l.
Install sleeve (20) on piston rod (18).
m.
Install piston rod assembly (18) into cylinder (27).
n.
Install caps (3 and 11) alining end caps square with each other and hose fittings in line.
o.
Install four bolts (6), nuts (5), and lockwashers.
Install rubber boot (28).
p.
Install clevis (16) with nut (17) and secure.
q.
r.
Place rubber boot (28) in place over nut (17).
7-4
