TM 5-3895-371-24 & P
(29)
Remove micro switch (2, fig. 3-110) with attached bracket (3) by removing two screws
(8).
(30)
Remove screws (5 and 7) and attached clamps (4 and 6). Lay the cable aside,
fasten the assembly to the tank; and screw (3) that joins the two tubes together. Disconnect oil feed
line (2) and pull off the burner assembly (1) with the tapered spacers located behind the burners.
TA 075984
Figure 3-110. Disconnect/Connect Micro Switch and Cables.
3-93
