TM 5-3895-371-24 & P
NOTE
Install only three capscrews even though there are
four bolt holes.
(3) Tighten hex nuts (14) evenly.
(4)
Install capscrews (10), lockwashers (11) and hex nuts (12).
(5)
Tighten hex nuts (12) evenly.
(6) Slide chain guard (5) over mounting plate and install two capscrews (16) and lock-
washers ( 17); one above and one below.
Universal Joint Replacement. (Refer to para 2-14.)
c.
6.
LEGEND:
JOURNAL AND BEARING KIT (2)
12.
HEX NUT (8)
1. UNIVERSAL DRIVE
7.
DOUBLE CENTER
13.
FLANGE
2. SPACER (2)
8.
FLANGE YOKE
14.
HEX NUT (3)
3. CAPSCREW (3)
9.
COMPANION FLANGE
15.
LOCKWASHER (3)
4. FLANGE WITH SPROCKET
10.
CAPSCREW (8)
16.
CAPSCREW (2)
5. CHAIN GUARD
11.
LOCKWASHER (8)
17.
LOCKWASHER (2)
TA 075835
Figure 2-29.
Remove/Install Pump Universal Drive.
2-70
