TM 5-3895-371-24 & P
(10)
Cut nylon ties (19) securing hoses to tubes above rear crossbrace.
(11)
Unscrew bolt, washer, and nut from tubing retainer (18) at rear crossbrace.
Unscrew fittings of hose (21) from air control box (7) and air cylinder (17); remove
(12)
hose (21).
(13)
Unscrew fittings of hose (22) from air control box (7) and air cylinder (17); remove
hose (22).
(14) Unscrew fittings of hose (23) from 'T' fitting on air control box (7) and air cylinder (20);
remove hose (23).
(15) Unscrew fittings of hose (25) from bottom of 'T' fitting on air control box (7) and 'T'
fitting (34); remove hose (25).
(16) Unscrew fittings of hose (24) from 'T' fitting on air control box (7) and air cylinder
(20); remove hose (24).
(17) Unscrew fittings of hose (26) from bottom of 'T' fitting on air control box (7) and
air cylinder (13); remove hose (26).
(18) Unscrew fittings of hose (27) from bottom of air control box (7) and 'T' fitting (29);
remove hose (27).
(19)
Unscrew fittings of hose (28) from air control box (7) and air cylinder (13); remove
hose (28).
(20) Unscrew fittings of two hoses (31) from air cylinder (30) and two tubes (33); remove
two hoses (31).
(21)
Unscrew bolt, washer, and nut from tubing retainer (32).
(22)
Unscrew bolt, washer, and nut from tubing retainer (32) at air cylinder (14).
(23) Unscrew fittings of two hoses (15) from air cylinder (14) and two tubes (16); remove
two hoses (15).
(24) Remove as an assembly two tubes (16); 'T' fittings (34) and (29), and two tubes (33);
lift assembled tubes up and out of tubing retainers (18), and (32).
(25)
Unscrew two tubes (16) and two tubes (33) from two 'T' fittings (34) and (29).
Installation. (Refer to fig. 2-19.)
b.
(1)
Screw two tubes (16) and two tubes (33) to two 'T' fittings (34) and (29).
(2) Set into tube retainers (18), and (32), as an assembly of two tubes (16), two 'T' fit-
tings (34) and (29) and two tubes (33).
(3)
Install bolt, nut, washer to tube retainers (18), and (32).
(4)
Install fittings of two hoses (15) to air cylinder (14) and two tubes (16).
(5)
Install fittings of two hoses (31) to air cylinder (30) and two tubes (33).
2-52
