TM 5-3895-371-24 & P
Disassembly. Loosen set screw and remove lock arm (7), remove two nuts (6) and capscrews
b.
(9) from handle (8) and remove handle. Drill out rivets (13) from hinge (11) and remove hinge from
lid (4).
Assembly. Install hinge (11) to lid (4) with five bolts (12) and nuts (10). Install handle (8)
C.
and secure with two nuts (6) and capscrews (9). Install lock arm (7) and tighten set screw.
d.
(1)
Set stowage box (5) on rear frame rails and secure with six capscrews (3).
(2)
Position lid (4) on stowage box (5) and secure with five capscrews (2).
Section VIII. MAINTENANCE OF BELL
2-12. Bell.
a.
(1)
Loosen screw (1) and pull out lanyard (2).
LEGEND:
1. SCREW
2. LANYARD
3. CAPSCREW (2)
4. BELL ASSEMBLY
5. STRIKER
6. ACTUATING ARM
TA 075809
Figure 2-5.
Remove/Install Bell Mechanism and Lanyard.
2-24
