TM 5-3895-373-20
D.
INSTALL - Continued.
3.
INSTALL RELAYS.
Thread locking compound solvent
can cause eye damage. Wear safety
goggles/glasses when using. Avoid
contact with eyes. If solvent contacts
eyes, flush eyes with water and get
immediate medical attention.
a.
Clean threads of hex head cap screws (22) with
thread locking compound solvent.
b.
Install flat washer (23) and ground wire terminal
(24) on hex head cap screw (22).
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
c.
Apply thread locking compound
(Item
13,
Appendix C) to threads of hex head cap screws
(22).
d.
Install start relay (25) and induction heater relay
(26) onto transformer panel (27) and secure with
hex head cap screws (22).
e.
Tighten hex head cap screws (22) to 9 lb-ft (12
Nm).
GO TO NEXT PAGE
7-101